
Telecom Pole Line Diagram
The materials on one utility pole:
seventeen in all
From the band that holds the messenger wire to the ground rod below. Tap a number to go to that item.
- 1Arm Tie BandView product →
Mounted on the line pole to hold a messenger dead-end clamp or suspension clamp, which secures the galvanized steel strand.Specs: IP pole 7m–100mm · CP pole 150 · 180 · 200 · 220 · 250 · 280mm
- 2Messenger Dead-End Clamp (Suspension Clamp)Request a quote →
Secures the galvanized steel strand of the line.
- 3Pole PinView product →
A pin that fixes suspension clamps, clamp hooks and similar fittings to the top of a steel or concrete pole.Specs: 18 · 21 · 24 · 27cm
- 4Cable HangerView product →
Hangs cables installed on KEPCO utility poles from the messenger wire.Specs: 55 · 65 · 75 · 85 · 95 · 105mm
- 5Galvanized Steel StrandRequest a quote →
Used to support cables.Specs: 7×2.3 (30SQ) · 7×2.6 (38SQ)
- 6Spiral SleeveRequest a quote →
A second layer wrapped over the cable jacket to protect telecom (fiber optic) cables from impact and fire.Specs: flame-retardant · standard — black (aerial) · orange (underground)
- 7Pole StepRequest a quote →
Mounted on the pole to serve as a ladder.
- 8Guy Wire BandView product →
Used to fix the aerial guy wire to a dead-end pole.Specs: 110mm for IP poles
- 9Messenger Connecting Clamp (2B Clamp)Request a quote →
Used with the Guy Wire Band to secure the messenger wire to a dead-end pole.
- 10Steel Half-PipeRequest a quote →
A guard pipe that keeps cables from being damaged on vertical riser runs.Specs: 50×2400 · 100×2400
- 11Half-Pipe Mounting BandView product →
A band that fixes the half-pipe installed on the pole.Specs: 1150mm · stainless steel (SUS)
- 12Guy Anchor RodRequest a quote →
A rod buried in the ground to anchor the guy wire and keep the pole from leaning.
- 13Concrete Block (for Guy Wire)Request a quote →
Attached to the guy anchor rod and buried to keep the pole from leaning.
- 14Concrete Block (for Pole)Request a quote →
Attached to the pole and buried to keep it from leaning.
- 15Concrete Block Band (Pole Footing Band)Request a quote →
A band that connects and fixes the buried pole block to the pole.
- 16C-Type SleeveRequest a quote →
Copper sleeves are crimped at wire splice points to prevent outages and keep CATV transmission uninterrupted.
- 17Copper Ground RodView product →
Protects telecom and power facilities from lightning.Specs: 1000mm · 1800mm
- 1. Arm Tie Band
- Mounted on the line pole to hold a messenger dead-end clamp or suspension clamp, which secures the galvanized steel strand.Specs: IP pole 7m–100mm · CP pole 150 · 180 · 200 · 220 · 250 · 280mm
- 2. Messenger Dead-End Clamp (Suspension Clamp)
- Secures the galvanized steel strand of the line.
- 3. Pole Pin
- A pin that fixes suspension clamps, clamp hooks and similar fittings to the top of a steel or concrete pole.Specs: 18 · 21 · 24 · 27cm
- 4. Cable Hanger
- Hangs cables installed on KEPCO utility poles from the messenger wire.Specs: 55 · 65 · 75 · 85 · 95 · 105mm
- 5. Galvanized Steel Strand
- Used to support cables.Specs: 7×2.3 (30SQ) · 7×2.6 (38SQ)
- 6. Spiral Sleeve
- A second layer wrapped over the cable jacket to protect telecom (fiber optic) cables from impact and fire.Specs: flame-retardant · standard — black (aerial) · orange (underground)
- 7. Pole Step
- Mounted on the pole to serve as a ladder.
- 8. Guy Wire Band
- Used to fix the aerial guy wire to a dead-end pole.Specs: 110mm for IP poles
- 9. Messenger Connecting Clamp (2B Clamp)
- Used with the Guy Wire Band to secure the messenger wire to a dead-end pole.
- 10. Steel Half-Pipe
- A guard pipe that keeps cables from being damaged on vertical riser runs.Specs: 50×2400 · 100×2400
- 11. Half-Pipe Mounting Band
- A band that fixes the half-pipe installed on the pole.Specs: 1150mm · stainless steel (SUS)
- 12. Guy Anchor Rod
- A rod buried in the ground to anchor the guy wire and keep the pole from leaning.
- 13. Concrete Block (for Guy Wire)
- Attached to the guy anchor rod and buried to keep the pole from leaning.
- 14. Concrete Block (for Pole)
- Attached to the pole and buried to keep it from leaning.
- 15. Concrete Block Band (Pole Footing Band)
- A band that connects and fixes the buried pole block to the pole.
- 16. C-Type Sleeve
- Copper sleeves are crimped at wire splice points to prevent outages and keep CATV transmission uninterrupted.
- 17. Copper Ground Rod
- Protects telecom and power facilities from lightning.Specs: 1000mm · 1800mm



